Workshop · diagnostics and repairsWe reply the same day
Diagno.ee
EGR valve

P0405 EGR valve position sensor signal too low

By: · Updated:

P0405 means: EGR valve position sensor signal too low. The engine computer can't control the EGR valve properly, or doesn't trust its position sensor. OK to drive, but have it checked soon. The repair usually costs about €80–500 in Estonia. The most common cause: valve clogged with soot.

Is it safe to drive?OK to driveOK to drive, but have it checked soon.
Typical repair cost€80–500parts and labour in Estonia

What it means

The engine computer can't control the EGR valve properly, or doesn't trust its position sensor. The sensor voltage is too low. Usually a wire is broken or a connector is loose.

What could be wrong

  1. 1Valve clogged with soot
  2. 2Valve connector or wire
  3. 3Valve motor or position sensor has failed

What you can check yourself

Check the EGR valve connector. The valve is near the intake manifold. You can check the simple things yourself, but the repair is best done in a workshop.

How we fix it

  1. We measure valve control and the position sensor
  2. We clean the valve
  3. We replace the valve

Standard SAE description: EGR Sensor A Circuit Low

Want a definite answer?

Bring the car to our workshop in Estonia for diagnostics. We read the fault codes, test the sensors and tell you what is wrong. Repair price depends on the work involved, generally €45 per hour.

Book a diagnostic check

Questions

What does fault code P0405 mean?

EGR valve position sensor signal too low. The engine computer can't control the EGR valve properly, or doesn't trust its position sensor. The sensor voltage is too low. Usually a wire is broken or a connector is loose.

Can I drive with code P0405?

OK to drive, but have it checked soon.

How much does it cost to fix P0405?

Roughly €80–500 in Estonia. The price depends on exactly what has failed and on the car.

How is P0405 fixed?

We measure valve control and the position sensor. We clean the valve. We replace the valve.

Related codes

P0400EGR valve not working properlyP0401Too little gas flowing through the EGR valveP0402Too much gas flowing through the EGR valveP0403Fault in the EGR valve wiringP0404EGR valve isn't where it should beP0406EGR valve position sensor signal too highP0411Secondary air pump not delivering enough airP0490Short circuit in the EGR valve wiring

Based on AI combined with our hands-on workshop experience and knowledge. This information is general and prices are approximate (Estonian workshop rates). The same code can mean different things on different cars. Only an inspection of the car gives a definite answer.

Book a diagnostic check