Workshop · diagnostics and repairsWe reply the same day
Diagno.ee
Turbo and boost pressure

P2563 Turbo boost control position sensor: reading or operation not right ("A")

By: · Updated:

P2563 means: Turbo boost control position sensor: reading or operation not right ("A"). The turbo pushes extra air into the engine. Drive gently and have the car checked soon. The repair usually costs about €80–1800 in Estonia. The most common cause: leaking boost hose or intercooler.

Is it safe to drive?Get it checked soonDrive gently and have the car checked soon.
Typical repair cost€80–1800parts and labour in Estonia

What it means

The turbo pushes extra air into the engine. The computer found the boost pressure wrong or the turbo control not working. The car often goes into limp mode. There is a signal, but the reading or operation isn't plausible. The cause may be the part itself or a real mechanical fault.

What you may notice

  • Much less power (limp mode)
  • Turbo whistling or hissing
  • Black smoke
  • Engine light on

What could be wrong

  1. 1Leaking boost hose or intercooler
  2. 2Turbo actuator (VNT or wastegate) stuck
  3. 3Boost pressure sensor reading wrong
  4. 4Control solenoid or its vacuum hose
  5. 5Worn turbo

Repair difficulty: Hard

What you can check yourself

Check the boost hoses, especially the joints and around the intercooler. An oily hose points to a leak. Best left to a workshop. It needs a diagnostic tool and experience.

How we fix it

  1. We measure boost pressure on a test drive
  2. We pressure-test the boost hoses
  3. We check the actuator movement and solenoid
  4. We replace the hose or sensor, or repair the turbo

Standard SAE description: Turbocharger Boost Control Position Sensor "A" Circuit Range/Performance

This code usually comes with: Check engine lightSee what the light means →

Related symptoms: Loss of power or limp mode · Smoke from the exhaust

Want a definite answer?

Bring the car to our workshop in Estonia for diagnostics. We read the fault codes, test the sensors and tell you what is wrong. Repair price depends on the work involved, generally €45 per hour.

Book a diagnostic check

Questions

What does fault code P2563 mean?

Turbo boost control position sensor: reading or operation not right ("A"). The turbo pushes extra air into the engine. The computer found the boost pressure wrong or the turbo control not working. The car often goes into limp mode. There is a signal, but the reading or operation isn't plausible. The cause may be the part itself or a real mechanical fault.

Can I drive with code P2563?

Drive gently and have the car checked soon.

How much does it cost to fix P2563?

Roughly €80–1800 in Estonia. The price depends on exactly what has failed and on the car.

How is P2563 fixed?

We measure boost pressure on a test drive. We pressure-test the boost hoses. We check the actuator movement and solenoid. We replace the hose or sensor, or repair the turbo.

Related codes

P2564Turbo boost control position sensor: signal or voltage too low ("A")P2562Turbo boost control position sensor: circuit fault ("A")P0039Turbo bypass valve: reading or operation not rightP0045Turbo and boost pressure: open circuit ("A")P0046Turbo and boost pressure: reading or operation not right ("A")P0424Catalyst temperature sensor: too low (heated catalyst, bank 1)P0402Too much gas flowing through the EGR valve

Based on AI combined with our hands-on workshop experience and knowledge. This information is general and prices are approximate (Estonian workshop rates). The same code can mean different things on different cars. Only an inspection of the car gives a definite answer.

Book a diagnostic check