P2407 EVAP leak detection pump: signal drops out at times (sense line)

By: Diagno editorial team · Updated: 2026-10-15

P2407 means: EVAP leak detection pump: signal drops out at times (sense line). Fuel vapour from the tank is collected in a charcoal canister and burnt in the engine. OK to drive, but have it checked soon. The repair usually costs about €40–250 in Estonia.

What it means

Fuel vapour from the tank is collected in a charcoal canister and burnt in the engine. The computer found a leak or a valve fault in this system. It usually doesn't affect driving. The signal drops out now and then. The most common cause is a loose connector or a chafed wire.

What you may notice

• Engine light on
• Sometimes a faint fuel smell
• The pump nozzle may click off early when filling

What could be wrong

1. 1Connector loose, damp or corroded
2. 2Wire broken or chafed
3. 3Faulty valve
4. 4Engine computer fault (rare)

Repair difficulty: Easy

What you can check yourself

First look at the connector and wiring: anything loose, melted or green with corrosion? Tighten the fuel cap until it clicks. If you smell strong fuel, have it checked straight away. You can do the simpler checks yourself.

How we fix it

1. We read the fault data on the diagnostic tool and check whether the fault is constant
2. We measure the circuit's supply, ground and signal
3. We repair the wire or replace the connector
4. If the wiring is fine, we replace the valve

Standard SAE description: Evaporative Emission System Leak Detection Pump Sense Circuit Intermittent/Erratic