P2113 Accelerator pedal position sensor: reading or operation not right ("B")

By: Diagno editorial team · Updated: 2026-10-15

P2113 means: Accelerator pedal position sensor: reading or operation not right ("B"). There are usually two throttle or accelerator pedal position sensors and they must agree. Drive gently and have the car checked soon. The most common repair costs about €90–180 in Estonia, depending on make and model.

What it means

There are usually two throttle or accelerator pedal position sensors and they must agree. The computer found a wrong signal or the two don't match. There is a signal, but the reading or operation isn't plausible. The cause may be the part itself or a real mechanical fault.

What you may notice

• Engine light on
• Limp mode with no power
• Throttle response is delayed
• Idle hunts

What could be wrong

1. 1Dirty throttle body or worn sensor · Throttle body clean or replace €90–180
2. 2Worn accelerator pedal sensor · Accelerator pedal sensor replacement €120–240
3. 3Corroded connector · Wiring or connector repair €45–90
4. 4Broken wire · Wiring or connector repair €45–90

Repair difficulty: Moderate

What you can check yourself

Check the throttle body and pedal connectors. Cleaning the throttle body often helps. You can check the simple things yourself, but the repair is best done in a workshop.

How we fix it

1. We read the sensor on the diagnostic tool and compare it with other sensors
2. We check the connector, supply and ground
3. We repair the wiring or replace the sensor or throttle body

Standard SAE description: Throttle/Pedal Position Sensor "B" Minimum Stop Performance