P0705 Gear selector sensor gives a wrong reading
P0705 means: Gear selector sensor gives a wrong reading. The automatic gearbox control unit found a fault. Drive gently and have the car checked soon. The repair usually costs about €100–2500 in Estonia. The most common cause: gearbox oil is low or old. Other possible causes: sensor or solenoid has failed, wire or connector.
What it means
The automatic gearbox control unit found a fault. The gearbox may go into limp mode: it stays in one gear and shifts harshly or not at all. The gearbox doesn't know exactly which position the selector is in. The car may not start or may not go into gear.
What could be wrong
- 1Gearbox oil is low or old
- 2Sensor or solenoid has failed
- 3Wire or connector
- 4Internal gearbox wear
What you can check yourself
Check for oil spots under the car. Avoid hard acceleration and don't drive far in limp mode. Best left to a workshop. It needs a diagnostic tool and experience.
How we fix it
- We read all the gearbox fault codes
- We check the gearbox oil
- We replace the sensor, solenoid or oil, and repair the gearbox if needed
Standard SAE description: Transmission Range Sensor Circuit (PRNDL Input)