Workshop · diagnostics and repairsWe reply the same day
Diagno.ee
Sensors

P0107 Intake pressure (MAP) sensor signal too low

By: · Updated:

P0107 means: Intake pressure (MAP) sensor signal too low. The MAP sensor measures pressure in the intake. Drive gently and have the car checked soon. The repair usually costs about €40–200 in Estonia. The most common cause: sensor is dirty with soot or oil (especially on diesels).

Is it safe to drive?Get it checked soonDrive gently and have the car checked soon.
Typical repair cost€40–200parts and labour in Estonia

What it means

The MAP sensor measures pressure in the intake. The engine computer uses it to work out how much fuel to inject. The sensor voltage is too low. Usually a wire is broken or a connector is loose.

What could be wrong

  1. 1Sensor is dirty with soot or oil (especially on diesels)
  2. 2Connector or wire
  3. 3Sensor hose is loose or split
  4. 4Sensor has failed

What you can check yourself

Check the sensor connector and hose. The sensor is on the intake manifold or the intercooler pipe. You can do the simpler checks yourself.

How we fix it

  1. We compare the sensor reading with atmospheric pressure
  2. We clean the sensor or repair the wire
  3. We replace the sensor

Standard SAE description: MAP/Barometric Pressure Circuit Low Input

Want a definite answer?

Bring the car to our workshop in Estonia for diagnostics. We read the fault codes, test the sensors and tell you what is wrong. Repair price depends on the work involved, generally €45 per hour.

Book a diagnostic check

Questions

What does fault code P0107 mean?

Intake pressure (MAP) sensor signal too low. The MAP sensor measures pressure in the intake. The engine computer uses it to work out how much fuel to inject. The sensor voltage is too low. Usually a wire is broken or a connector is loose.

Can I drive with code P0107?

Drive gently and have the car checked soon.

How much does it cost to fix P0107?

Roughly €40–200 in Estonia. The price depends on exactly what has failed and on the car.

How is P0107 fixed?

We compare the sensor reading with atmospheric pressure. We clean the sensor or repair the wire. We replace the sensor.

Related codes

P0100Fault in the mass air flow sensor wiringP0102Mass air flow sensor signal too lowP0103Mass air flow sensor signal too highP0105Fault in the intake pressure (MAP) sensor wiringP0106Intake pressure (MAP) sensor reads wrongP0108Intake pressure (MAP) sensor signal too highP0110Fault in the intake air temperature sensor wiringP0112Intake air temperature sensor reads too warm

Based on AI combined with our hands-on workshop experience and knowledge. This information is general and prices are approximate (Estonian workshop rates). The same code can mean different things on different cars. Only an inspection of the car gives a definite answer.

Book a diagnostic check